Turbine Support Services Rely on Borescope Inspection Equipment

The world that we live in grows increasingly complicated and technical, but there will always be some basic principles that will stay the same. For instance, engineers will always need to know that the equipment that they are using is safe so that it can function properly. With the use of borescope inspection services, for instance, engineers and installation experts can find out that turbines are without flaws so they can continue to work properly.

If it were not for the use of turbines , it would be difficult to get the power that is needed for many of the services that we require. Did you know, for instance, that steam turbines have been used since the 1880s for electricity production? Ever since they were first invented, of course, there has been a need to make sure that all of these turbines are working correctly and efficiently. As inspection services have advanced, there are now more accurate ways for engineers to make sure that every part is doing its job. Borescopes can be used to look for cracks and breaks in places where it is not humanly possible to see.
With tools that provide a close up inspection, engineers can then decide if they need to use parts removal services to improve a turbine’s efficiency. In fact, turbine support depends on borescopes and other technologies to make sure that all parts are working as they should.

Consider some of these facts and figures about the turbine industry and the inspection services that are used to make sure that energy efficient services are provided to all clients:

  • Heavy frame engines and aeroderivative engines are the two types of land based gas turbines.
  • Compressor module, combustion module, and turbine module are the three primary modules in a gas turbine.
  • One of the reasons that inspections are so important is that gas turbines operate at a much higher temperature than steam turbines. In fact, gas turbines typically operate at 2,000 degrees Fahrenheit compared to 1,200 degrees Fahrenheit for a steam turbine. This heat can cause damage so it is important to thoroughly inspect all of the working parts on a regular basis.
  • Salt particles can also be damaging to a turbine. In fact, when salt particles attach themselves to turbine blades, they attract other particles, like dirt. This buildup can decrease the turbine‚Äôs power output by up to 15%.

Available in both rigid and flexible lengths, borescopes are a tool that turbine support crews rely on for many of their daily tasks. Turbine support crews around the world, in fact, rely on these important inspection tools.

canada goose prix canada goose prix sac michael kors

Leave a Reply

+
RSS
Follow by Email